ミキシング関連文献リスト （2014年）
AIChE
Journal Vol. 60 (2014)
A coupled population balance model
and CFD approach for the simulation of mixing issues in lab-scale and
industrial bioreactors
Jérôme Morchain, Jean-Christophe
Gabelle and Arnaud Cockx, 27–40
Comparison of DEM results and
Lagrangian experimental data for the flow and mixing of granules in a rotating
drum
Ebrahim Alizadeh, Francois
Bertrand and Jamal Chaouki, 60–75
Transfer of a nanoparticle product
between different mixers using latent variable model inversion
Emanuele Tomba, Natascia
Meneghetti, Pierantonio Facco, Tereza Zelenková, Antonello A. Barresi, Daniele
L. Marchisio, Fabrizio Bezzo and Massimiliano Barolo, 123–135
Tomography images to analyze the
deformation of the cavern in the continuous-flow mixing of non-Newtonian fluids
Dineshkumar Patel, Farhad
Ein-Mozaffari and Mehrab Mehrvar, 315–331
Use of an areal distribution of
mixing intensity to describe blending of non-newtonian fluids in a kenics KM
static mixer using PLIF
F. Alberini, M. J. H. Simmons, A.
Ingram and E. H. Stitt, 332–342
Analysis of the
advection–diffusion mixing by the mapping method formalism in 3D open-flow
devices
Oleksandr Gorodetskyi, Michel F.M.
Speetjens, Patrick D. Anderson and Massimiliano Giona, 387–407
Investigation of flow parameters
and efficiency of mixture separation on a structured packing
Аleksandr Pavlenko, Vladimir
Zhukov, Nikolay Pecherkin, Vladimir Chekhovich, Oleg Volodin, Alexey Shilkin
and Christoph Grossmann, 690–705
Dependence of shear and
concentration on fouling in a membrane bioreactor with rotating membrane discs
Mads K. Jørgensen, Malene T.
Pedersen, Morten L. Christensen and Thomas R. Bentzen, 706–715
LDA measurements and CFD
simulations of an in-line high shear mixer with ultrafine teeth
Shuangqing Xu, Qin Cheng, Wei Li
and Jinli Zhang, 1143–1155
Effect of mixer geometry and
operating conditions on flow mixing of shear thinning fluids with yield stress
Jaime Sossa-Echeverria and
Fariborz Taghipour, 1156–1167
Neutron radiography and numerical
simulation of mixing behavior in a reactor for supercritical hydrothermal
synthesis
Ken-ichi Sugioka, Kyohei Ozawa,
Takao Tsukada, Seiichi Takami, Tadafumi Adschiri, Katsumi Sugimoto, Nobuyuki
Takenaka and Yasushi Saito, 1168–1175
In situ characterization of floc
morphology by image analysis in a turbulent Taylor–Couette reactor
Mélody Vlieghe, Carole
Coufort-Saudejaud, Christine Frances and Alain Liné, 2389–2403
Intensification of fast exothermic
reaction by gas agitation in a microchemical system
Jisong Zhang, Kai Wang, Xiyan Lin,
Yangcheng Lu and Guangsheng Luo, 2724–2730
Gas–liquid mass-transfer
properties in CO2 absorption system with ionic liquids
Xin Zhang, Di Bao, Ying Huang,
Haifeng Dong, Xiangping Zhang and Suojiang Zhang, 2929–2939
Modeling of cavern formation in
yield stress fluids in stirred tanks
Qi Xiao, Ning Yang, Jiahua Zhu and
Liejin Guo, 3057–3070
Flow and temperature patterns in
an inductively coupled plasma reactor: Experimental measurements and CFD
simulations
Sangeeta B. Punjabi, Sunil N.
Sahasrabudhe, S. Ghorui, A. K. Das, Narendra K. Joshi, Dushyant C. Kothari,
Arijit A. Ganguli and Jyeshtharaj B. Joshi, 3647–3664
Mathematical modeling of the
partial hydrogenation of vegetable oil in a monolithic stirrer reactor
Diego E. Boldrini, Daniel E.
Damiani and Gabriela M. Tonetto, 3524–3533
Effect of impeller design and
power consumption on crystal size distribution
Chinmay V. Rane, Kalekudithi
Ekambara, Jyeshtharaj B. Joshi and Doraiswami Ramkrishna, 3596–3613
Natural Giesekus fluids: Shear and
extensional behavior of food gum solutions in the semidilute regime
Maria D. Torres, Bart Hallmark, D.
Ian Wilson and Loic Hilliou, 3902–3915
Orbitally shaken
bioreactors—viscosity effects on flow characteristics
Andrea Ducci and Weheliye Hashi
Weheliye, 3951–3968
Wet dispersion mechanism of fine
aggregates in multiphase flow with solid beads under simple shear
Daisuke Nishiura, Hide Sakaguchi
and Atsuko Shimosaka,4076–4085
Canadian
Journal of Chemical Engineering
Vol. 92 (2014)
Influence of the second
emulsification step during production of W/O/W multiple emulsions: Comparison
of different methods to determine encapsulation efficiency in W/O/W emulsions
Anna Schuch, Ayse Nur Tonay,
Karsten Köhler and Heike P. Schuchmann, 203–209
Parameter optimisation and
validation for droplet population balances
Hanin B. Jildeh, Menwer Attarakih,
Matthias Mickler and Hans-Jörg Bart, 210–219
Evaluation of breakage kernels for
liquid–liquid systems: Solution of the population balance equation by the
least-squares method
Jannike Solsvik, Zsolt Borka, Per
Julian Becker, Nida Sheibat-Othman and Hugo A. Jakobsen, 234–249
On the solution of the dynamic
population balance model describing emulsification: Evaluation of weighted
residual methods
Jannike Solsvik, Per J. Becker,
Nida Sheibat-Othman and Hugo A. Jakobsen, 250–265
Solution of the dynamic population
balance equation describing breakage–coalescence systems in agitated vessels:
The least-squares method
Jannike Solsvik and Hugo A.
Jakobsen, 266–287
Monitoring silicone oil droplets
during emulsification in stirred vessel: Effect of dispersed phase
concentration and viscosity
Per Julian Becker, François Puel,
Yves Chevalier and Nida Sheibat-Othman, 296–306
Online monitoring, simulation and
prediction of multiphase flows
Matthias Mickler, Hanin B. Jildeh,
Menwer Attarakih and Hans-Jörg Bart, 307–317
Non-aqueous, surfactant-free
antifoam emulsions: Properties and triggered release
Tatiana D. Dimitrova, Severine
Cauvin, Jean-Paul Lecomte and Annick Colson, 330–336
A dual approach for modelling and
optimisation of industrial urea reactor: Smart technique and grey box model
Sohrab Zendehboudi, Gholamreza
Zahedi, Alireza Bahadori, Ali Lohi, Ali Elkamel and Ioannis Chatzis, 469–485
Effect of liquid level and
agitator pumping direction on turbulent blend times
Kevin J. Myers, Jeremy K. Jones,
Eric E. Janz and Julian B. Fasano, 643–647
Support vector machines combined
to observers for fault diagnosis in chemical reactors
Nida Sheibat-Othman, Nassim
Laouti, Jean-Pierre Valour and Sami Othman, 685–695
Pumping characterisation of the
maxblend impeller for Newtonian and strongly non-Newtonian fluids
Vincent Stobiac, Louis Fradette,
Philippe A. Tanguy and Francois Bertrand, 729–741
Compartmental modelling of
turbulent fluid flow for the scale-up of stirred tanks
Hamed Bashiri, Mourad Heniche,
François Bertrand and Jamal Chaouki, 1070–1081
Population balance model: Breakage
kernel parameter estimation to emulsification data
Jannike Solsvik, Per J. Becker,
Nida Sheibat-Othman and Hugo A. Jakobsen, 1082–1099
Simulation of gas–solid flow in
rectangular spouted bed by coupling CFD–DEM and LES
Chunhua Wang, Zhaoping Zhong,
Xiaoyi Wang and Siti Aisyah Alting, 1488–1494
CFD characterization of monolithic
reactors for kinetic studies
Soheil Soltani, Carolin
Wang-Hansen, Ronnie Andersson and Bengt Andersson, 1570–1578
Modelling of a solid dissolution
in liquid with chemical reaction: Application to the attack reaction of
phosphate by sulphuric acid
Nader Frikha, Amira Hmercha and
Slimane Gabsi, 1829–1838
Analysis of heat transfer in a
vessel with helical pipe coil and multistage impeller
Martin Dostál, Marcela Věříšová,
Karel Petera, Tomáš Jirout and Ivan Fořt, 2115–2121
CFD simulation and comparison of
industrial crystallizers
Chinmay V. Rane, Arijit A.
Ganguli, Ekambara Kalekudithi, Raosaheb N. Patil, Jyeshtharaj B. Joshi and
Doraiswami Ramkrishna, 2138–2156
Selective hydrogenation of
3,4-dimethoxybenzophenone in liquid phase over Pd/C catalyst in a slurry reactor
Manishkumar S. Tiwari, Ganapati D.
Yadav and Flora T. T. Ng, 2157–2165
Chemical
Engineering Science Vol. 105-120 (2014)
Micromixing performance of
nanoparticle suspensions in a micro-sieve dispersion reactor
C. Dong, J.S. Zhang, K. Wang, G.S.
Luo, 8-15
Fluid mixing in a microchannel
with longitudinal vortex generators
Kai-Yo Hsiao, Chih-Yang Wu, Yi-Tun
Huang, 27-36
Prediction of the mixing behaviour
of binary mixtures of particles in a bladed mixer
M. Halidan, G.R. Chandratilleke,
S.L.I. Chan, A.B. Yu, J. Bridgwater, 37-48
Numerical investigation on the
reactive gas mixing through interaction between twin square jets side-by-side
and a crossflow
F. Roger, A. Gourara, J.-M. Most,
H.Y. Wang, 45-55
Volumetric mass transfer
coefficient in multiple-impeller gas–liquid contactors. Scaling-up study for
various impeller types
Libor Labík, Radek Vostal, Tomáš
Moucha, František Rejl, Michal Kordač, 55-61
Swirl flow tube reactor
technology: An experimental and computational fluid dynamics study
Carl M. Schietekat, Marco W.M. van
Goethem, Kevin M. Van Geem, Guy B. Marin, 56-65
Flow field simulation and mixing
efficiency assessment of the multi-inlet vortex mixer for molybdenum sulfide
nanoparticle precipitation
S. Bensaid, F.A. Deorsola, D.L.
Marchisio, N. Russo, D. Fino, 66-77
VDROP: A comprehensive model for
droplet formation of oils and gases in liquids - Incorporation of the
interfacial tension and droplet viscosity
Lin Zhao, Jagadish Torlapati,
Michel C. Boufadel, Thomas King, Brian Robinson, Kenneth Lee, 93-106
Power consumption, local and
average volumetric mass transfer coefficient in multiple-impeller stirred bioreactors
for xanthan gum solutions
Ming-hui Xie, Jian-ye Xia, Zhen
Zhou, Guo-zhong Zhou, Ju Chu, Ying-ping Zhuang, Si-liang Zhang, Henk Noorman,
144-156
Assessment of different methods of
analysis to characterise the mixing of shear-thinning fluids in a Kenics KM
static mixer using PLIF
F. Alberini, M.J.H. Simmons, A.
Ingram, E.H. Stitt, 152-169
Synthesis of TiO2 nanoparticles in
a spinning disc reactor
Somaieh Mohammadi, Adam Harvey,
Kamelia V.K. Boodhoo, 171-184
Modeling of power characteristics
for multistage rotor–stator mixers of shear-thinning fluids
Huashuai Wu, Shuli Shu, Ning Yang,
Guoping Lian, Shiping Zhu, Mingyan Liu, 173-182
The characterization of the
residence time distribution in a magnetic mixer by means of the information
entropy
Rafał Rakoczy, Marian Kordas,
Grzegorz Story, Maciej Konopacki, 191-197
Mixing dynamics in uncovered
unbaffled stirred tanks
A. Busciglio, F. Grisafi, F.
Scargiali, A. Brucato, 210-219
Monte Carlo simulation of free
radical polymerization of styrene in a spinning disc reactor
Yousef Mohammadi, Amir Saeid
Pakdel, Mohammad Reza Saeb, Kamelia Boodhoo, 231-240
Rapid vortex microfluidic mixer
utilizing double-heart chamber
Lung-Ming Fu, Wei-Ching Fang,
Hui-Hsiung Hou, Yao-Nan Wang, Ting-Fu Hong, 246-251
Using tomography to visualize the
continuous-flow mixing of biopolymer solutions inside a stirred tank reactor
Dineshkumar Patel, Farhad
Ein-Mozaffari, Mehrab Mehrvar, 257-273
Behaviour of air diffusers and
oxygen transfer efficiencies in the biological treatment of matrices at high
alkalinity concentrations: Experimental and full scale application
Anna Laura Eusebi, Paolo
Battistoni, 274-281
Chemical
Engineering & Technology Vol. 37
(2014)
Prediction of the Induced Gas Flow
Rate from a Self-Inducing Impeller with CFD
Cláudio P. Fonte, Bruno S. Pinho,
Vania Santos-Moreau and José Carlos B. Lopes, 571–579,
Liquid-Solid Mass Transfer
Behavior of a Stirred-Tank Reactor with a Fixed Bed at Its Bottom
Mohamed A. El-Naggar, Mohamed H.
Abdel-Aziz, Ahmed A. Zatout and Gomaa H. Sedahmed, 1525–1531,
Energy Dissipation Rates of
Newtonian and Non-Newtonian Fluids in a Stirred Vessel
Xu Wang, Xin Feng, Chao Yang and
Zai-Sha Mao, 1575–1582,
Mass Transfer Reaction Kinetics of
β-Isophorone Oxidation by Air in an Agitator Bubbling Reactor
Hong Yin, Caiping Sheng, Zhirong
Chen, Shenfeng Yuan, Haoran Li and Jun Mei, 1797–1804,
Industrial
& Engineering Chemistry Research
Vol. 53 (2014)
Flow and Mixing of Cohesive
Particles in a Vertical Bladed Mixer
Rohana Chandratilleke, Aibing Yu,
John Bridgwater, and Kunio Shinohara, 4119–4130
Flow Pattern, Mixing, Gas Hold-Up
and Mass Transfer Coefficient of Triple-Impeller Configurations in Stirred Tank
Bioreactors
Minghui Xie, Jianye Xia, Zhen
Zhou, Ju Chu, Yingping Zhuang, and Siliang Zhang, 5941–5953
Experimental Investigations in
Liquid–Liquid Dispersion System: Effects of Dispersed Phase Viscosity and
Impeller Speed
Mohd Izzudin Izzat Zainal Abidin,
Abdul Aziz Abdul Raman, and Mohamad Iskandr Mohamad Nor, 6554–6561
Markov Chain Modeling the Mixing
of Coal and Solid Heat Carriers in a Continuous Colliding Static Mixer
Minshu Zhan, Shuxian Liu, Yuming
Zhang, Guogang Sun, and Li Weng, 6830–6839
Solid–Liquid Suspensions in
Top-Covered Unbaffled Vessels: Influence of Particle Size, Liquid Viscosity,
Impeller Size, and Clearance
A. Tamburini, A. Brucato, A.
Busciglio, A. Cipollina, F. Grisafi, G. Micale, F. Scargiali, and G. Vella,
9587–9599
Effects of Geometry and Process
Conditions on Mixing Behavior of a Multijet Mixer
Kaikai Pei, Ruijiang Li, and Zibin
Zhu, 10700–10706
External Heat Transfer Coefficient
in Agitated Vessels Using a Radial Impeller and Vertical Tube Baffles
Vitor da Silva Rosa, Marlene Silva
de Moraes, Juliana Tófano de Campos Leite Toneli, and Deovaldo de Moraes Júnior,
13797–13803
Negative Impact of High Stirring
Speed in Laboratory-Scale Three-Phase Hydrogenations
Inci Ayranci, Suzanne Kresta, Jing
Shen, and Natalia Semagina, 18091–18094
Experimental Study on Micromixing
in a Single-Feed Semibatch Precipitation Process in a Gas–Liquid–Liquid Stirred
Reactor
Dang Cheng, Xin Feng, Chao Yang,
Jingcai Cheng, and Zai-Sha Mao, 18420–18429
JOURNAL
OF CHEMICAL ENGINEERING OF JAPAN
Vol. 47 (2014)
Enhancement in the Crystal Growth
Rate for a Classified Bed-Type Crystallizer Using the Adhesion Phenomena of
Fine Crystals
Koji Masaoka, Ryuta Misumi,
Kazuhiko Nishi, Meguru Kaminoyama, 78-84
Review of Visualization of Flow
and Dispersion States of Slurry System Fluids in Stirred Vessels
Meguru Kaminoyama, 109-114
Power Consumption and Mixing
Performance of an Eccentrically Located Maxblend Impeller
Kazuhiko Nishi, Naoki Enya, Ryuta
Misumi, Meguru Kaminoyama, 146-150
Process Development for Ultrasonic
Fracturing of Zirconium Phosphate Particles
Takafumi Horie, Shinsuke Akao,
Takayuki Suzuki, Koki Tanaka, Ning Jia, Keita Taniya, Satoru Nishiyama, Naoto
Ohmura, 124-129
Fluid Deformation Induced by a
Rotationally Reciprocating Impeller
Saki Senda, Yoshiyuki Komoda,
Yushi Hirata, Hiroshi Takeda, Hiroshi Suzuki, Ruri Hidema, 151-158
Flow and Oxygen-Dissolution
Characteristics of Microbubbles in a Viscoelastic Fluid
Hiroshi Suzuki, Yuto Furukawa,
Ruri Hidema, Yoshiyuki Komoda 201-206
CFD Prediction of Effects of
Impeller Design on Floating Solids Mixing in Stirred Tanks with Pitched Blade
Turbines
Shengchao Qiao, Rijie Wang,
Xiaoxia Yang, Yuefei Yan, 373-381
Mixing Performance Evaluation in
Continuous Laminar Flow
Yusuke Suzuki, Ryuta Misumi,
Kazuhiko Nishi, Meguru Kaminoyama, 363-372
Gas Dispersion in an Agitated
Vessel Equipped with Large Impeller
Koji Takahashi, Itaru Tanimoto,
Hitoshi Sekine, Yasuyuki Takahata, 717-721
Effects of Impeller Type on Mixing
Performance in Continuous Laminar Flow
Yusuke Suzuki, Ryuta Misumi,
Kazuhiko Nishi, Meguru Kaminoyama, 805-814
Chemical
Engineering Research & Design(IChemE) Vol.
92 (2014)
Static mixers: Mechanisms,
applications, and characterization methods – A review
Akram Ghanem, Thierry Lemenand,
Dominique Della Valle, Hassan Peerhossaini, 205-228
CFD analysis of interphase mass
transfer and energy dissipation in a milliliter-scale stirred-tank reactor for
filamentous microorganisms
Stefanie Brüning, Dirk
Weuster-Botz, 240-248
Mixing of viscous Newtonian fluids
in a vessel equipped with steady and unsteady rotating dual-turbine impellers
Szymon Woziwodzki, 435-446
CFD simulation and PIV measurement
of the flow field generated by modified pitched blade turbine impellers
Chun-Yan Ge, Jia-Jun Wang,
Xue-Ping Gu, Lian-Fang Feng, 1027-1036
Influence of drag and turbulence
modelling on CFD predictions of solid liquid suspensions in stirred vessels
A. Tamburini, A. Cipollina, G.
Micale, A. Brucato, M. Ciofalo, 1045-1063
CFD modeling of gas entrainment in
stirred tank systems
A.L. Kulkarni, A.W. Patwardhan,
1227-1248
Reduced power consumption compared
to a traditional stirred tank reactor (STR) for enzymatic saccharification of
alpha-cellulose using oscillatory baffled reactor (OBR) technology
Matthew S.R. Abbott, Gustavo
Valente Perez, Adam P. Harvey, Mike K. Theodorou, 1969-1975
Effect of the impeller imbalance
on the bending moment acting on a shaft in a stirred vessel
Daien Shi, Yangyang Liang, Archie
Eaglesham, Zhengming Gao, 2191-2200
Effect of gas flow on the bending
moment acting on a shaft in a sparged vessel stirred by a Pitched Blade Turbine
Daien Shi, Ziqi Cai, Yangyang
Liang, Archie Eaglesham, Zhengming Gao, 2255-2263
The effect of melt viscosity on
thermal efficiency for single screw extrusion of HDPE
Javier Vera-Sorroche, Adrian L.
Kelly, Elaine C. Brown, Tim Gough, Chamil Abeykoon, Phil D. Coates, Jing Deng,
Kang Li, Eileen Harkin-Jones, Mark Price, 2404-2412
Automated self seeding of batch
crystallizations via plug flow seed generation
Steven Ferguson, Gary Morris,
Hongxun Hao, Mark Barrett, Brian Glennon, 2534-2541
化学工学論文集
Vol. 40 (2014)
ディスパー翼の撹拌所要動力の相関
加藤 禎人, 南雲 亮, 古川 陽輝, 伊藤 晋太朗, 多田 豊, 高 承台, 李 泳世, 1-4
コーン型ドラフトチューブ付撹拌槽の混合性能
古川 陽輝, 加藤 禎人, 南雲 亮, 多田 豊, 佐藤 誠, 282-285
種々の形状を持った撹拌翼における通気時の撹拌動力の推算
相田 真男, 庄野 厚, 366-371
邪魔板無しおよび弱い邪魔板条件の気液撹拌槽における所要動力と物質移動
亀井 登, 加藤 禎人, 南雲 亮, 古川 陽輝, 鈴木 智也, 多田 豊, 372-375
流体混合と黄金比条件
井上 義朗, 川添 博, 山田 雅弘, 平田 雄志, 449-461 79-484